- Characteristic
- 1. The internal and external panels of the room are made of painted galvanized steel sheets with interlocking fire-resistant thermal insulation boards of mineral wool, 50 mm thick. The thickness of the painted steel sheets is 0.426 mm. These are professional wall panels for paint booths, manufactured by single-component casting on an assembly line. The room is equipped with a three-leaf folding door and a side door for pedestrians. The door is made using sheet metal technology. Both the main and side doors are equipped with viewing windows, and a small step is provided at the entrance through the side door. The door leaf is equipped with a lock to prevent overpressure inside the room. The entire structure is hermetic and durable, has a decent color, thermal insulation, fire resistance, and high hardness. The roof covering is made of galvanized steel.
- Characteristic
- 2. The 300 mm high platform is made of galvanized steel plate and galvanized cast structure. It is equipped with a steel support structure, characterized by high strength, aesthetic appearance and durability. The unit can be installed on the left, right and rear. It is equipped with two rows of grid mesh and three rows of patterned anti-slip plates.
- 3. Ramp for boarding a vehicle
- 3 ramps, 900 mm wide each, made of anti-slip patterned sheet material.
- Lamps are installed on the upper side and side walls of the building. The upper side lamps are installed at an angle
- 45° and consist of 32 LED tubes with a power of 16 W. The side wall lights consist of 16 LED tubes with a power of 16 W and are installed vertically inside the wall panels, providing illumination inside the room of more than 1000 lumens.
- Characteristic
- 1. The YDW series centrifugal fan, manufactured using Siemens technology, features low noise levels, a large volume of blown air, and low energy consumption.
- a. Blower model 4.5 L; Consumption
- 12500 m³; Full pressure 800 A; Speed: 900 rpm; Power: 4 kW; 2 units;
- b. Exhaust fan model YDW5.6M; flow 20000 m³/h; total pressure 810 Pa; rotation speed
- 900 rpm; power 7.5 kW.
- Characteristic
- 2. The supply and exhaust fan is made of a galvanized profile frame and connected to sheet steel with a sprayed coating.
- The heating method uses quantum emitters. Ten rail emitters (each
- 1 kW each) are installed on top of the drying oven; twelve rail emitters (1 kW each) are installed on each side of the oven. The total power of the emitters is 34 kW. Each group of emitters is controlled independently.
- Characteristic
- It uses microcomputer-based software, and the main components are selected from well-known domestic and foreign brands. The main circuit is equipped with multi-level protection and automatically displays the entire working process and fault status. It is equipped with temperature and time sensors, room temperature spray sensors, constant temperature spray sensor, paint baking sensor, lighting sensor, stop switch, emergency switch, fault alarm, etc.
- The system uses a two-stage filtration structure
- The coarse filtration layer is made of high-quality domestic non-woven material, effectively trapping dust particles larger than 15 µm, and is located at the air inlet to the generator housing, with a movable door for easy replacement; the precision filtration layer is made of specially developed high-quality «BtoB» filter material, which has a multi-layer structure and effectively traps dust particles larger than 5 µm. It is located in the lower part of the static pressure chamber and is supported by a galvanized top mesh, which makes it aesthetic and convenient for replacement. The entire cleaning system is characterized by high dust capacity, low air resistance, long service life, and 98% filtration efficiency.
- Characteristic
- To ensure compliance of exhaust emissions with national standards, numerous filters for removing paint mist and activated carbon adsorption devices are used.
Almaty, Khaliullina 158, Car town mall, 2nd floor, office 29
